Special purpose gloves

Description Chemical resistant gloves Guide 4022 Thickness: Thickness 0.66 mm. Length 33 cm. Resistance: Thick gloves with good resistance to chemicals and mechanical damage. Features: Contains latex for improved flexibility. Lining: Flocked cotton fabric lining for comfort. Other: Contains no silicone. Composition: neoprene, chloroprene, latex, flocked cotton. Suitable for use: In heavy industries and cleaning works using solutions of heavy acids, salts and alcohols. Conforms to EN 374-1:2016 Type A EN374-5:2016 VIRUS Sizes: 7-10 Size 6, 7, 8, 9, 10 Standards and certificates EN 374-1 EN374-5

Description Work gloves made of Golfverde material Guide 570 Features: Excellent grip, even when the surface is wet Upper: The upper side of the gloves is made of elastic cotton synthetic fabric. Cuff: Elastic cuff with Velcro strap optimally fits the wrist Fingers: Reinforced seams and fingertips. The base of the thumb is maximally ergonomic. Other: Washable at 40°. Sizes: 7-12 Complies with CE category 1 according to EN 420 Size 7, 8, 9, 10, 11, 12 Standards and certificates EN 420 DYDIS

Description Extremely comfortable and flexible gloves made of synthetic Amara fabric Guide 761 Features: Excellent grip, even when the surface is wet. Upper: The upper half of the gloves is made of soft fibers for a comfortable wear. Palm: Palm made of flexible and strong synthetic Amara fabric. Other: Reinforced seams and index finger, Washable at 40° C. Suitable for: work with constructions and various tools that require high sensitivity of the fingers. Crafts, industry, construction. Complies with CE category 1 according to EN420 Sizes: 7-11 Size 7, 8, 9, 10, 11 Standards and certificates EN420

Description Extremely comfortable and flexible Amara synthetic gloves with fleece lining Guide 762 Features: Excellent grip, even when the surface is wet. Upper: The upper half of the gloves is made of soft fibers for a comfortable wear. Palm: Palm made of flexible and strong synthetic Amara fabric. Lining: Soft fleece lining without chrome. Other: Reinforced seams and index finger, Washable at 40° C Suitable for: work with constructions and various tools that require high sensitivity of the fingers. Crafts, industry, construction. Complies with CE category 1 according to EN420 Sizes: 7-11 Size 7, 8, 9, 10, 11 Standards and certificates EN420

Description Extremely comfortable and flexible synthetic leather substitute gloves with fleece lining Guide 764 Features: Excellent grip, even when the surface is wet. Upper: The upper half of the gloves is made of soft fibers for a comfortable wear. Palm: Palm made of flexible and strong synthetic leather substitute. Lining: Soft fleece lining. Other: Reinforced seams and index finger. Suitable for use: for working with structures and various tools that require high sensitivity of the fingers. Crafts, industry, construction. Complies with CE category 1 according to EN388 Sizes: 7-11 Size 7, 8, 9, 10, 11 Standards and certificates EN388

Description Extremely comfortable and flexible synthetic leather substitute gloves Guide 765 Features: Excellent grip, even when the surface is wet. Upper: The upper half of the glove is made of synthetic stretch fiber Spandex for a comfortable fit. Palm: Palm made of flexible and strong synthetic leather substitute. Fingers: Deformed finger cut Cuff: Open cuff without fastening. Rubber on wrist Other: Reinforced seams and index finger. Suitable for use: for working with structures and various tools that require high sensitivity of the fingers. Crafts, industry, construction. Complies with CE category 1 according to EN388, 3121 Sizes: 7-11 Size 7, 8, 9, 10, 11 Standards and certificates EN388

Description Knitted cut-resistant gloves G-TEK Polykor Anti-CUT2, coated with polyurethane. Work gloves G-TEK Polykor TM Anti-CUT3 coated with polyurethane, protect against cuts. Knitted seamless nylon gloves for working with elastane fit perfectly and allow the skin to "breathe". The gloves are covered with an extremely soft, finely porous layer of polyurethane. Extremely strong mechanically, resistant to friction and tearing. The third level of resistance. Top: Knitted gloves of various fabric fibers. Fingertips coated with polyurethane Palm: coated with polyurethane. Cuff: Knitted elastic cuff. Other: Thanks to the special composition, the gloves have extremely good mechanical resistance properties, so they last significantly longer than ordinary gloves coated with polyurethane or nitrile. Size: 6,7,8,9,10,11 Package: 12 pairs; box 72 pairs Suitable for use: for working with constructions and various tools, in construction, crafts. Standard: EN388 (4242), CE marking. The level of protection is only valid for the wet part of the glove Glove resistance: abrasion resistance level 4 cut resistance level 2 tear resistance level 4 puncture resistance level 2 Size 6, 7, 8, 9, 10, 11 Standards and certificates EN388

Description Knitted cut-resistant gloves G-TEK Anti-CUT5, coated with polyurethane. Work gloves G-TEK Anti-CUT5 coated with polyurethane, protect against cuts. Knitted seamless polyamide gloves for work with elastane fit perfectly and allow the skin to "breathe". The gloves are covered with an extremely soft, finely porous layer of polyurethane. Extremely strong mechanically, resistant to friction and tearing. Highest resistance level 5. Top: Knitted gloves of various fabric fibers. The ends of the fingers are coated with polyurethane. Palm: coated with polyurethane. Cuff: Knitted elastic cuff. Other: Thanks to the special composition, the gloves have extremely good mechanical resistance properties, so they last significantly longer than ordinary gloves coated with polyurethane or nitrile. Size: 11 Package: 12 pairs; box 72 pairs Suitable for use: for working with constructions and various tools, in construction, crafts. Standard: EN388 (4543), CE marking. The level of protection is only valid for the wet part of the glove Glove resistance: abrasion resistance level 4 cut resistance level 5 tear resistance level 4 puncture resistance level 3 Size 6, 7, 8, 9, 10, 11, 12 Standards and certificates EN388

Description Cut-resistant work gloves Pesso Work gloves PESSO Anti-CUT5 coated with nitrile, protect against cuts. Knitted nylon gloves for working with elastane fit perfectly and allow the skin to "breathe". The gloves are covered with an extremely soft, finely porous layer of nitrile. Extremely strong mechanically, resistant to friction and tearing. At the highest (5) resistance level. Top: Knitted gloves of various fabric fibers. Fingertips covered with nitrile. Palm: coated with nitrile. Cuff: Knitted elastic cuff. Other: Thanks to the special composition, the gloves have extremely good mechanical resistance properties, so they last significantly longer than ordinary gloves coated with polyurethane or nitrile. Size: 9,10,11 Package: 12 pairs; box 144 pairs Suitable for use: for working with constructions and various tools, in construction, crafts. Standard: EN388 (4543), CE marking. The level of protection is only valid for the dirty part of the gloves Glove resistance: abrasion resistance level 4 cut resistance level 5 tear resistance level 4 puncture resistance level 3 Pesso work clothes, boots and APP Catalog: pessosafety.eu Size 8, 9, 10, 11, 12 Standards and certificates EN388

High-quality JUBA MT160 work gloves for chainsaw operators made from goatskin with palm reinforcements and chainsaw protection for the left hand.
Material: smooth goatskin combined with textile, ± 1,2 mm
Cuff: adjustable with hook-and-loop tab
Sizes: 9/L, 10/XL, 11/XXL, 12/XXXL
Standard: EN21420:2020, EN388:2016 (2123X), EN11393-4:2019 Class 1, Type 2, CE marking

A290 work gloves for chainsaw operators made from high-quality leather with a reinforced palm and chainsaw protection in the left glove.
Material: natural cattle leather combined with polyester
Cuff: elastic
Sizes: L
Standard: EN21420:2020, EN388:2016 (3123X), EN381-7 Class 0, CE marking

Anti-vibration SIP 2SA3 work gloves for chainsaw operators made from high-quality natural leather with vibration-absorbing foam in the palm.
Material: 100% hydrophobic smooth cattle leather, ± 1,2 mm
Cuff: elastic
Sizes: 10, 11
Standard: EN21420:2020, EN388:2016 (3132X), CE marking

Work Gloves MOTORMAN (114.4279) are quality work gloves with nitrile coating.
Material: nylon fully coated with nitrile microfoam
Cuff: elastinis
Sizes: 8, 9, 10, 11
Standard: EN388 (4121A), EN407 (X1XXXX), CE marking
Pack: 144/12

Work Gloves AMET, anti-vibration are quality work gloves with latex coating, anti-vibration.
Material: 95% nylon; 5% cotton
Palm: latex foam
Cuff: knitted
Sizes: 10
Standard: EN 388, EN 420, EN10819:2013, CE marking, Category II
Pack: 60/6 poros

Premium anti-vibration VIBRATION gloves with a special damping layer in the palm and finger area for more comfortable work with vibrating tools.
Upper: durable stretch spandex fabric, black, with reflective elements.
Palm: MacroSkin Pro synthetic leather (Amara) with silicone coating for better grip
Inner layer: vibration-damping material
Cuff: closed with a special GRANBERG hook-and-loop tab that does not snag knitwear or other fabrics
Length: 24 cm
Sizes: 8, 9, 10, 11, 12
Standard: EN388 (2221), EN10819:2013, CE marking
Pack: 60/6